Type I JS Polymer Modified Cementitious Waterproofing Coating 40kg/Set White 1.8kg/㎡ High Adhesion Basement Use

Type I JS waterproof coating 40kg/set white 1mm (1.8kg/㎡) high adhesion basement use

      Product Description      

Polymer modified cement waterproofing coating is a two-component, water-based building waterproof coating compounding with a reasonable ratio of an organic liquid material (composed of polyacrylate and various additives) and inorganic powder (composed of inorganic fillers such as cement, quartz sand, light and heavy calcium carbonate, and various additives).

      Advantages      

• It can be directly applied on the wet or dry substrate surface with good adhesion.
• Adapting spraying method will greatly elevate the installation efficiency and enable the film thickness more uniform and dense.
• Polyacrylate is used as the main raw material of emulsion, which has better water resistance, no re-emulsion and no swelling.
• As water-based waterproof coating, it is non-toxic and pollution -free.
• It can be used in combination with many other waterproof coatings or self-adhesive membranes, suitable for different grades of waterproofing projects.

      Specification      

                                                                               According to product performance, it is classified into type I, type II and type III.

      Application      

Type I

Building waterproof parts requiring vibration and deformation.

Type II

· It can be used in combination with self-adhesive membranes for waterproofing of basement side walls, decks and roofs of buildings.

· Building waterproofing parts like toilet, kitchen, enclosed balcony.

Type III

Waterproof to outdoor exterior wall.

      Product Standard      

GB/T23445-2009 "Polymer cement waterproof coating"

      Dosage of reference      

To achieve coating thickness of 1mm, the reference dosage should be 1.8-2.0 KG/M2.